Instructions for using your Premier E-cigarette Starter Kit
1. Charge your battery
Screw the battery onto the USB charger. Attach to a standard 5V USB wall plug or USB port. Charge time is around 2 hours or until charger light turns from red to green. Do not leave the battery unattended or charging overnight. Learn about battery safety here.
2. Fill your clearomizer tank
Fill the clearomizer with the supplied e-liquid by unscrewing the mouth-piece and carefully pouring the e-Liquid fluid down the side of the chamber. Then wait 5 minutes for the e-liquid to coat and be absorbed by the wick in the clearomizer. Leaving the wick to fully soak with e-liquid will ensure you don't burn the wick when you first turn your e-cigarette on.
3. You are ready to vape!
Assemble the device as shown. Do not over tighten. There is a five click (click in quick succession) on/off mechanism which will prevent the battery from activating when not in use. The button on the battery needs to be depressed each time you inhale. Inhale slowly and enjoy a smooth ‘vape’.
4. Tips
Always try to keep the parts clean and free from dirt and liquid. Only use the charger supplied. Do not charge in wet conditions. Cease use if the battery gets hot or smells unusual.If you have any questions please contact our friendly support team on 1300 662 689.